Space Station floor tile with a funicular void inset into an industrial tread. Size, 50mm x 50mm x 5mm thick when printed. Can be joined with other Moonhopper resin tiles of the same size. Each side has two 2mm diameter holes centrally placed, 2mm deep spaced at 30mm (15mm each from centre, 10mm from edge).
This can either be printed flat, or edge on (holes on platform side will need to be retapped using a 2mm hand drill). Alternatively, the tile can be printed with medium supports added.
This is one of a set of Space Station floor tiles – some have similar but distinct patterns to allow for variety. These can also be mirrored or merged with one another to produce interesting variations for floor tile patterns.