Every castle needs a throne room or ante chamber. This floor set piece creates just that.
Castle floor tile – size, 150mm x 150mm x 5mm thick when the four printed quadrants are combined and glued together. Can be joined with other Moonhopper resin tiles 50mm x 50mm x 5mm thick once assembled. Each side has two 2mm diameter holes centrally placed, 2mm deep spaced at 30mm (15mm each from centre, 10mm from edge).
This can either be printed flat, or edge on (holes on platform side will need to be retapped using a 2mm hand drill). Alternatively, the tile can be printed with medium supports added.
This is part of a set of Castle floor tiles – some have similar but distinct patterns to allow for variety. These can also be mirrored or merged with one another to produce interesting variations for floor tile patterns.